Generators – QR

Generator Guide

All Generators can do:

(2) Blowers on the 120v Plugs

(1) Blower on the 220v

Troubleshooting:

Engine Won’t Start:

  • Confirm that the generator is in the “On” position.
  • Check the oil level, and top it off if needed.
  • Inspect the spark plug for fouling or damage. Clean or replace as necessary.
  • Ensure the choke is set correctly.

Overloaded Generator:

  • Check if the generator is overloaded. Reduce the load by disconnecting non-essential devices.
Fuel Issues:
  • Ensure there is sufficient fuel in the tank.
  • Check for fuel contamination, such as water or debris.
  • Verify that the fuel shutoff valve is open.
  • Oil Indication Light on if low oil. (5w-30 if oil needed)